System does not support!

Moderators: dwp, devin

Post Reply
simy
Posts: 1
Joined: Tue Jan 03, 2012 6:21 am

System does not support!

Post by simy »

I'm getting "System does not support" When I click on anything but the phone icon, unless I've called them very recently. Is this how you edit/change/view a contact?
I've stripped my phone of most 'stock' applications in favor of better ones (for example yours) I've just purchased it thinking it was a trial thing, apparently it wasn't.

Below is logcat of me pressing on a few contacts.

Code: Select all

V/AudioPolicyManager(  122): setOutputDevice() setting same device 2 or null device for output 1
V/AudioPolicyManager(  122): checkAndSetVolume stream 1, index 2
V/AudioPolicyManager(  122): computeVolume Speaker Volume = 0.177828 , device = 2, stream = 1, index = 2
V/AudioPolicyManager(  122): releaseOutput() 1
I/ActivityManager(  177): Starting: Intent { act=android.intent.action.VIEW dat=content://com.android.contacts/contacts/91 } from pid 599
I/InputReader(  177): dispatchTouch::touch event's action is 1, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 1, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
I/InputReader(  177): dispatchTouch::touch event's action is 0, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 0, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
I/InputReader(  177): dispatchTouch::touch event's action is 1, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 1, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
V/AudioPolicyManager(  122): stopOutput() output 1, stream 1, session 83
E/AudioPolicyManager(  122): stopOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getNewDevice() selected device 0
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 0 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 0 or null device for output 1
E/SoundPool(  177): sampleID=1, leftVolume=0.250000, rightVolume=0.250000, priority=0, loop=0, rate=1.000000
E/SoundPool(  177): soundchannel play streamType 1, channels 4
V/AudioPolicyManager(  122): startOutput() output 1, stream 1, session 84
E/AudioPolicyManager(  122): startOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getDeviceForStrategy() from cache strategy 0, device 2
V/AudioPolicyManager(  122): getNewDevice() selected device 2
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 2 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 2 or null device for output 1
V/AudioPolicyManager(  122): checkAndSetVolume stream 1, index 2
V/AudioPolicyManager(  122): computeVolume Speaker Volume = 0.177828 , device = 2, stream = 1, index = 2
V/AudioPolicyManager(  122): releaseOutput() 1
I/ActivityManager(  177): Starting: Intent { act=android.intent.action.VIEW dat=content://com.android.contacts/contacts/91 } from pid 599
D/BatteryService(  177): update start
D/BatteryService(  177): US/CANADA GSM Models
D/BatteryService(  177): updateBattery level:86 scale:100 status:2 health:2 present:true voltage: 4 temperature: 300 temperatureAdc: 932 technology: Li-ion AC
powered:false USB powered:true icon:17302243
D/PowerManager(  177): acquire flags=0x1 tag=WifiService
D/PowerManager(  177): release flags=0x0 tag=WifiService
I/StatusBarPolicy(  282): BAT. S:2 H:2
D/PhoneApp(  295): Intent.ACTION_BATTERY_CHANGED : 2
D/PhoneUtils(  295): updateRAFT current state : 4
D/PhoneUtils(  295): updateRAFT() : FactoryMode : false
D/PhoneUtils(  295): updateRAFT current and requested states are same, so do nothing
V/AudioPolicyManager(  122): stopOutput() output 1, stream 1, session 84
E/AudioPolicyManager(  122): stopOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getNewDevice() selected device 0
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 0 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 0 or null device for output 1
I/InputReader(  177): dispatchTouch::touch event's action is 0, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 0, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
I/InputReader(  177): dispatchTouch::touch event's action is 1, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 1, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
E/SoundPool(  177): sampleID=1, leftVolume=0.250000, rightVolume=0.250000, priority=0, loop=0, rate=1.000000
E/SoundPool(  177): soundchannel play streamType 1, channels 4
V/AudioPolicyManager(  122): startOutput() output 1, stream 1, session 85
E/AudioPolicyManager(  122): startOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getDeviceForStrategy() from cache strategy 0, device 2
V/AudioPolicyManager(  122): getNewDevice() selected device 2
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 2 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 2 or null device for output 1
V/AudioPolicyManager(  122): checkAndSetVolume stream 1, index 2
V/AudioPolicyManager(  122): computeVolume Speaker Volume = 0.177828 , device = 2, stream = 1, index = 2
I/ActivityManager(  177): Starting: Intent { act=android.intent.action.VIEW dat=content://com.android.contacts/contacts/91 } from pid 599
V/AudioPolicyManager(  122): releaseOutput() 1
V/AudioPolicyManager(  122): stopOutput() output 1, stream 1, session 85
E/AudioPolicyManager(  122): stopOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getNewDevice() selected device 0
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 0 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 0 or null device for output 1
D/PowerManager(  686): acquire flags=0x1 tag=NetworkLocationCallbackRunner
D/PowerManager(  686): acquire flags=0x1 tag=NetworkLocationLocator
D/PowerManager(  177): acquire flags=0x1 tag=WifiService
D/PowerManager(  177): release flags=0x0 tag=WifiService
D/PowerManager(  177): acquire flags=0x1 tag=AlarmManager
D/PowerManager(  177): release flags=0x0 tag=AlarmManager
D/PowerManager(  686): release flags=0x0 tag=NetworkLocationCallbackRunner
D/PowerManager(  295): acquire flags=0x1 tag=RILJ
D/GANRIL  (  117): onRequest: GET_NEIGHBORING_CELL_IDS
W/GANRIL  (  117): WARNING _ RIL REQUEST NOT SUPPORTED _
D/PowerManager(  295): release flags=0x0 tag=RILJ
I/InputReader(  177): dispatchTouch::touch event's action is 0, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 0, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
I/InputReader(  177): dispatchTouch::touch event's action is 1, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 1, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
V/WifiMonitor(  177): Event [ SCAN-RESULTS ]
I/Kineto::main(  296): WCMGetLinkMetricsCbk iRSSI:-49
I/Kineto::wifi(  296): onReceive Enter
I/Kineto::wifi(  296): onReceive SCANNING
I/Kineto::main(  296): Kineto: HandleWifiChangeStatus val: 5
I/Kineto::main(  296): Kineto: Wifiscanning
I/wpa_supplicant(  278): SCAN_RESULTS : [2]
I/wpa_supplicant(  278): SCAN_RESULTS : [2]
I/Kineto::wifi(  296): onReceive Exit
I/wpa_supplicant(  278): SCAN_RESULTS : [2]
E/SoundPool(  177): sampleID=1, leftVolume=0.250000, rightVolume=0.250000, priority=0, loop=0, rate=1.000000
E/SoundPool(  177): soundchannel play streamType 1, channels 4
V/AudioPolicyManager(  122): startOutput() output 1, stream 1, session 86
E/AudioPolicyManager(  122): startOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getDeviceForStrategy() from cache strategy 0, device 2
V/AudioPolicyManager(  122): getNewDevice() selected device 2
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 2 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 2 or null device for output 1
V/AudioPolicyManager(  122): checkAndSetVolume stream 1, index 2
V/AudioPolicyManager(  122): computeVolume Speaker Volume = 0.177828 , device = 2, stream = 1, index = 2
V/AudioPolicyManager(  122): releaseOutput() 1
I/ActivityManager(  177): Starting: Intent { act=android.intent.action.VIEW dat=content://com.android.contacts/contacts/127 } from pid 599
D/PowerManager(  686): acquire flags=0x1 tag=NLP PendingIntent client in com.google.android.apps.maps
D/PowerManager(  686): release flags=0x0 tag=NLP PendingIntent client in com.google.android.apps.maps
D/PowerManager(  817): acquire flags=0x1 tag=LocationReceiverService
D/PowerManager(  177): acquire flags=0x1 tag=WifiService
D/PowerManager(  177): release flags=0x0 tag=WifiService
D/PowerManager(  686): release flags=0x0 tag=NetworkLocationLocator
D/PowerManager(  817): release flags=0x0 tag=LocationReceiverService
D/PowerManager(  817): acquire flags=0x1 tag=CheckinsNotificationService
I/wpa_supplicant(  278): SCAN_RESULTS : [2]
D/dalvikvm(  686): GC_CONCURRENT freed 464K, 47% free 3608K/6791K, external 0K/0K, paused 1ms+6ms
D/PowerManager(  817): release flags=0x0 tag=CheckinsNotificationService
V/AudioPolicyManager(  122): stopOutput() output 1, stream 1, session 86
E/AudioPolicyManager(  122): stopOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getNewDevice() selected device 0
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 0 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 0 or null device for output 1
W/WindowManager(  177): Window Window{40a00830 Toast paused=false} destroyed surface Surface(name=Toast, identity=-1, mNativeSurface=0), session Session{4094c6
10 uid 10012}
D/PowerManager(  177): release flags=0x0 tag=KEEP_SCREEN_ON_FLAG
D/PowerManagerService(  177): releaseWakeLockLocked flags=0x0 tag=KEEP_SCREEN_ON_FLAG myUID=1000 myPID=177 myTID=217
I/WindowManager(  177):   CREATE SURFACE Surface(name=Toast, identity=85, mNativeSurface=0) IN SESSION android.view.SurfaceSession@40b7f6d0: pid=599 format=-3
flags=0x0 / Window{408a9390 Toast paused=false}
D/PowerManager(  177): acquire flags=0xa tag=KEEP_SCREEN_ON_FLAG
D/PowerManagerService(  177): acquireWakeLock flags=0xa tag=KEEP_SCREEN_ON_FLAG uid=1000 pid=177   myUID=1000 myPID=177 myTID=579
I/InputReader(  177): dispatchTouch::touch event's action is 0, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 0, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
I/InputReader(  177): dispatchTouch::touch event's action is 1, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 1, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
D/AudioHardwareMSM7X30(  122): AudioStreamOutMSM72xx::standby()
D/AudioHardwareMSM7X30(  122): Deroute pcm out stream
V/AudioHardwareMSM7X30(  122): enableDevice() : value of device 2[2] and enable is 0
E/SoundPool(  177): sampleID=1, leftVolume=0.250000, rightVolume=0.250000, priority=0, loop=0, rate=1.000000
E/SoundPool(  177): soundchannel play streamType 1, channels 4
V/AudioPolicyManager(  122): startOutput() output 1, stream 1, session 87
E/AudioPolicyManager(  122): startOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getDeviceForStrategy() from cache strategy 0, device 2
V/AudioPolicyManager(  122): getNewDevice() selected device 2
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 2 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 2 or null device for output 1
V/AudioPolicyManager(  122): checkAndSetVolume stream 1, index 2
V/AudioPolicyManager(  122): computeVolume Speaker Volume = 0.177828 , device = 2, stream = 1, index = 2
I/ActivityManager(  177): Starting: Intent { act=android.intent.action.VIEW dat=content://com.android.contacts/contacts/141 } from pid 599
V/AudioPolicyManager(  122): releaseOutput() 1
V/AudioHardwareMSM7X30(  122): open driver
V/AudioHardwareMSM7X30(  122): get config
V/AudioHardwareMSM7X30(  122): set config
V/AudioHardwareMSM7X30(  122): buffer_size: 4800
V/AudioHardwareMSM7X30(  122): buffer_count: 2
V/AudioHardwareMSM7X30(  122): channel_count: 2
V/AudioHardwareMSM7X30(  122): sample_rate: 44100
V/AudioHardwareMSM7X30(  122): dec_id = 5
V/AudioHardwareMSM7X30(  122): cur_rx for pcm playback = 2
V/AudioHardwareMSM7X30(  122): enableDevice() : value of device 2[2] and enable is 1
V/AudioPolicyManager(  122): stopOutput() output 1, stream 1, session 87
E/AudioPolicyManager(  122): stopOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getNewDevice() selected device 0
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 0 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 0 or null device for output 1
I/InputReader(  177): dispatchTouch::touch event's action is 0, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 0, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
I/InputReader(  177): dispatchTouch::touch event's action is 1, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 1, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
E/SoundPool(  177): sampleID=1, leftVolume=0.250000, rightVolume=0.250000, priority=0, loop=0, rate=1.000000
E/SoundPool(  177): soundchannel play streamType 1, channels 4
I/ActivityManager(  177): Starting: Intent { act=android.intent.action.VIEW dat=content://com.android.contacts/contacts/74 } from pid 599
V/AudioPolicyManager(  122): startOutput() output 1, stream 1, session 88
E/AudioPolicyManager(  122): startOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getDeviceForStrategy() from cache strategy 0, device 2
V/AudioPolicyManager(  122): getNewDevice() selected device 2
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 2 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 2 or null device for output 1
V/AudioPolicyManager(  122): checkAndSetVolume stream 1, index 2
V/AudioPolicyManager(  122): computeVolume Speaker Volume = 0.177828 , device = 2, stream = 1, index = 2
V/AudioPolicyManager(  122): releaseOutput() 1
V/AudioPolicyManager(  122): stopOutput() output 1, stream 1, session 88
E/AudioPolicyManager(  122): stopOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getNewDevice() selected device 0
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 0 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 0 or null device for output 1
I/Kineto::main(  296): WCMGetLinkMetricsCbk iRSSI:-46
D/BatteryService(  177): update start
D/BatteryService(  177): US/CANADA GSM Models
D/BatteryService(  177): updateBattery level:86 scale:100 status:2 health:2 present:true voltage: 4 temperature: 300 temperatureAdc: 931 technology: Li-ion AC
powered:false USB powered:true icon:17302243
D/PowerManager(  177): acquire flags=0x1 tag=WifiService
D/PowerManager(  177): release flags=0x0 tag=WifiService
D/PhoneApp(  295): Intent.ACTION_BATTERY_CHANGED : 2
D/PhoneUtils(  295): updateRAFT current state : 4
D/PhoneUtils(  295): updateRAFT() : FactoryMode : false
D/PhoneUtils(  295): updateRAFT current and requested states are same, so do nothing
I/StatusBarPolicy(  282): BAT. S:2 H:2
I/InputReader(  177): dispatchTouch::touch event's action is 0, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 0, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
I/InputReader(  177): dispatchTouch::touch event's action is 1, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 1, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
E/SoundPool(  177): sampleID=1, leftVolume=0.250000, rightVolume=0.250000, priority=0, loop=0, rate=1.000000
E/SoundPool(  177): soundchannel play streamType 1, channels 4
V/AudioPolicyManager(  122): startOutput() output 1, stream 1, session 89
E/AudioPolicyManager(  122): startOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getDeviceForStrategy() from cache strategy 0, device 2
V/AudioPolicyManager(  122): getNewDevice() selected device 2
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 2 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 2 or null device for output 1
V/AudioPolicyManager(  122): checkAndSetVolume stream 1, index 2
V/AudioPolicyManager(  122): computeVolume Speaker Volume = 0.177828 , device = 2, stream = 1, index = 2
I/ActivityManager(  177): Starting: Intent { act=android.intent.action.VIEW dat=content://com.android.contacts/contacts/91 } from pid 599
V/AudioPolicyManager(  122): releaseOutput() 1
V/AudioPolicyManager(  122): stopOutput() output 1, stream 1, session 89
E/AudioPolicyManager(  122): stopOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getNewDevice() selected device 0
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 0 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 0 or null device for output 1
I/InputReader(  177): dispatchTouch::touch event's action is 0, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 0, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
I/InputReader(  177): dispatchTouch::touch event's action is 1, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 1, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
I/WindowManager(  177):   CREATE SURFACE Surface(name=Toast, identity=86, mNativeSurface=0) IN SESSION android.view.SurfaceSession@40b7f6d0: pid=599 format=-3
flags=0x0 / Window{408cc1a8 Toast paused=false}
W/WindowManager(  177): Window Window{408a9390 Toast paused=false} destroyed surface Surface(name=Toast, identity=-1, mNativeSurface=0), session Session{4094c6
10 uid 10012}
E/SoundPool(  177): sampleID=1, leftVolume=0.250000, rightVolume=0.250000, priority=0, loop=0, rate=1.000000
E/SoundPool(  177): soundchannel play streamType 1, channels 4
V/AudioPolicyManager(  122): startOutput() output 1, stream 1, session 90
E/AudioPolicyManager(  122): startOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getDeviceForStrategy() from cache strategy 0, device 2
V/AudioPolicyManager(  122): getNewDevice() selected device 2
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 2 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 2 or null device for output 1
V/AudioPolicyManager(  122): checkAndSetVolume stream 1, index 2
V/AudioPolicyManager(  122): computeVolume Speaker Volume = 0.177828 , device = 2, stream = 1, index = 2
V/AudioPolicyManager(  122): releaseOutput() 1
I/ActivityManager(  177): Starting: Intent { act=android.intent.action.VIEW dat=content://com.android.contacts/contacts/114 } from pid 599
V/AudioPolicyManager(  122): stopOutput() output 1, stream 1, session 90
E/AudioPolicyManager(  122): stopOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getNewDevice() selected device 0
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 0 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 0 or null device for output 1
I/InputReader(  177): dispatchTouch::touch event's action is 0, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 0, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
I/InputReader(  177): dispatchTouch::touch event's action is 1, pending(waiting finished signal)=0
I/InputDispatcher(  177): Delivering touch to current input target: action: 1, channel '407f9a58 com.dw.contacts.free/com.dw.dialer.Dialer (server)'
E/SoundPool(  177): sampleID=1, leftVolume=0.250000, rightVolume=0.250000, priority=0, loop=0, rate=1.000000
E/SoundPool(  177): soundchannel play streamType 1, channels 4
V/AudioPolicyManager(  122): startOutput() output 1, stream 1, session 91
E/AudioPolicyManager(  122): startOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getDeviceForStrategy() from cache strategy 0, device 2
V/AudioPolicyManager(  122): getNewDevice() selected device 2
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 2 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 2 or null device for output 1
V/AudioPolicyManager(  122): checkAndSetVolume stream 1, index 2
V/AudioPolicyManager(  122): computeVolume Speaker Volume = 0.177828 , device = 2, stream = 1, index = 2
I/ActivityManager(  177): Starting: Intent { act=android.intent.action.VIEW dat=content://com.android.contacts/contacts/88 } from pid 599
V/AudioPolicyManager(  122): releaseOutput() 1
V/AudioPolicyManager(  122): stopOutput() output 1, stream 1, session 91
E/AudioPolicyManager(  122): stopOutput stream = 1 , mHardwareOutput = 1, output = 1
V/AudioPolicyManager(  122): getNewDevice() selected device 0
V/AudioPolicyManager(  122): setOutputDevice() output 1 device 0 delayMs 0
V/AudioPolicyManager(  122): setOutputDevice() setting same device 0 or null device for output 1
I/Kineto::main(  296): WCMGetLinkMetricsCbk iRSSI:-47
D/AudioHardwareMSM7X30(  122): AudioStreamOutMSM72xx::standby()
D/AudioHardwareMSM7X30(  122): Deroute pcm out stream
V/AudioHardwareMSM7X30(  122): enableDevice() : value of device 2[2] and enable is 0
E/KINETO  (  296): KLOG082-  select returned. retVal = 0
E/KINETO  (  296):
E/KINETO  (  296): KLOG082-  send INFORMATIONAL exchange
E/KINETO  (  296):
E/KINETO  (  296): KLOG082-  Send from 0.0.0.0[4500] to 208.54.85.1[4500] using socket 55
E/KINETO  (  296):
E/KINETO  (  296): KLOG082-  send len 80 persend 1
E/KINETO  (  296):
E/KINETO  (  296): KLOG082-  select returned. retVal = 1
E/KINETO  (  296):
E/KINETO  (  296): KLOG082-   Processing incoming packet type 37
E/KINETO  (  296): KLOG082-  Delete ph2 spid 0 for  ->
E/KINETO  (  296):
E/KINETO  (  296): KLOG082-  After Calling ikev2_main
E/KINETO  (  296):
W/WindowManager(  177): Window Window{408cc1a8 Toast paused=false} destroyed surface Surface(name=Toast, identity=-1, mNativeSurface=0), session Session{4094c6
10 uid 10012}
D/PowerManager(  177): release flags=0x0 tag=KEEP_SCREEN_ON_FLAG
D/PowerManagerService(  177): releaseWakeLockLocked flags=0x0 tag=KEEP_SCREEN_ON_FLAG myUID=1000 myPID=177 myTID=217
I/WindowManager(  177):   CREATE SURFACE Surface(name=Toast, identity=87, mNativeSurface=0) IN SESSION android.view.SurfaceSession@40b7f6d0: pid=599 format=-3
flags=0x0 / Window{4094f070 Toast paused=false}
D/PowerManager(  177): acquire flags=0xa tag=KEEP_SCREEN_ON_FLAG
D/PowerManagerService(  177): acquireWakeLock flags=0xa tag=KEEP_SCREEN_ON_FLAG uid=1000 pid=177   myUID=1000 myPID=177 myTID=579
D/BatteryService(  177): update start
D/BatteryService(  177): US/CANADA GSM Models
D/PowerManager(  177): acquire flags=0x1 tag=WifiService
D/BatteryService(  177): updateBattery level:86 scale:100 status:2 health:2 present:true voltage: 4 temperature: 300 temperatureAdc: 930 technology: Li-ion AC
powered:false USB powered:true icon:17302243
D/PowerManager(  177): release flags=0x0 tag=WifiService
I/StatusBarPolicy(  282): BAT. S:2 H:2
D/PhoneApp(  295): Intent.ACTION_BATTERY_CHANGED : 2
D/PhoneUtils(  295): updateRAFT current state : 4
D/PhoneUtils(  295): updateRAFT() : FactoryMode : false
D/PhoneUtils(  295): updateRAFT current and requested states are same, so do nothing
^C

camel
Posts: 668
Joined: Sat Jun 04, 2011 8:38 pm

Re: System does not support!

Post by camel »

hi,
maybe you removed too much stock apps :)
dwc do using some different system INTENTS (like one of these is: "view contact" class/intent.
because:
1.) DWC do not having a own contact viewer
2.) contact viewer is on every android system different and it is not a good idea to mix that.
so it makes no senseto make a own contact viewer if it is existing on every android system.
next it is not a good idea to remove stock system contacts.app, becuase there are several other android system related intents (group class, sync engine, etc..)

so,we descide not to make a own contact viewer,because this was a mess and it makes no sense to "create the wheel again".

cu camel
Post Reply